Dallas Heating Repair, Furnace Installation & 24/7 Emergency Service

Heating Installation & Replacement (Furnace, Heat Pump, Ductless)

When repair isn't enough, we install new heating systems that save money and improve comfort.

High-Efficiency Furnace & Heat Pump Installation (Variable-Speed, Two-Stage)

We install high-efficiency furnaces including variable-speed blower models and two-stage furnace systems. Our heat pump installations include proper air handler setup for optimal performance.

Ductless Mini-Split Installation & Zoning

Perfect for room additions or homes without ducts, mini-splits provide efficient zoned heating and cooling.

Manual J/S/D Sizing, Permits & Code Compliance

We perform Manual J, Manual S, and Manual D calculations to size your system correctly. Our team handles all permits and ensures code compliance for safe, legal installations.

Installation Steps: Load Calculation to Final Commissioning

1. Manual J/S/D sizing verification

2. Permit pull and scheduling

3. Old system removal and disposal

4. New equipment installation with line sets, drains, and venting

5. Code inspection

6. System commissioning and homeowner walkthrough

Financing, Same-Day/Next-Day Installation

We offer financing with approved credit. Many installations happen the same or next day, so you're not waiting in the cold.

Seasonal Furnace & Heat Pump Maintenance

Annual maintenance keeps your heater running safely and efficiently all winter.

Why Annual Maintenance Matters (Efficiency, Safety, Warranty)

Regular tune-ups improve energy efficiency, catch problems early, and maintain your warranty. Most manufacturers require annual service to keep warranties valid.

Fall/Winter Tune-Up Checklist

• Heat exchanger inspection

• Burner and ignition cleaning

• Flame sensor cleaning

• Blower motor and amp draw checks

• Safety controls and CO testing

• Filter inspection and MERV rating check

Membership Plans & Priority Service

Join our maintenance plan for priority service, discounted repairs, and peace of mind knowing your system is professionally maintained.

Energy Efficiency, Sizing & Ductwork

Save money with properly sized, efficient equipment and sealed ducts.

AFUE, HSPF & SEER2 Explained for North Texas Homes

Look for high AFUE (Annual Fuel Utilization Efficiency) ratings on furnaces, and strong HSPF (Heating Seasonal Performance Factor) and SEER2 numbers on heat pumps. Legacy SEER ratings have been replaced by SEER2 standards as of 2023, with North Texas adhering to the new SEER2/HSPF2 test procedures for all new installations, ensuring accurate efficiency comparisons. We explain what these mean for your energy bills.

Right-Sizing with Manual J/S/D Load Calculations

Oversized heaters waste energy and create comfort problems. Our load calculations ensure your new system is perfectly sized for your home.

Duct Repair, Sealing & Zoning Dampers

Leaky ductwork wastes up to 30% of your heating energy. We provide duct sealing and can add zoning with zoning dampers for room-by-room temperature control.

Schedule Your Heating Service Today!

Pricing, Financing & Rebates

We make heating services affordable with clear pricing and multiple payment options.

• Written estimates before any work begins

• Transparent diagnostic fee (credited toward repair when you proceed)

• Low-rate financing options available

• Oncor rebate assistance and paperwork help

• Federal tax credit guidance and equipment registration for warranty optimization

Transparent, Written Estimates

You'll always receive written estimates before we start work. No hidden fees or surprise charges. Our diagnostic fee is credited toward the repair cost when you approve the work.

Low-Rate Financing & Payment Plans

Qualified buyers can finance new systems with low monthly payments. Ask about our current promotions.

Oncor Rebates & Federal Tax Credits

Take advantage of Oncor rebates and federal tax credit programs for qualifying high-efficiency systems. We help with rebate paperwork and equipment registration to maximize your warranties and savings.

Indoor Air Quality & Safety

• Your heating system affects more than just temperature - it impacts your home's air quality and safety.

  Carbon Monoxide Testing & CO Detector Placement

  We test for carbon monoxide leaks and recommend carbon monoxide detector placement for safety. If your CO alarm sounds: evacuate immediately, call 911 and your gas utility, then call us for emergency service once authorities clear the home.

  Smart Thermostats (Nest, Ecobee) & Zoning Controls

  Upgrade to a smart thermostat like Nest or Ecobee for better control and energy savings. Add zoning to heat only occupied areas.

  Filters (MERV/HEPA), UV Lights, Humidifiers/Dehumidifiers

  Improve indoor air quality with better filtration, UV purification, and humidity control. We install and maintain all IAQ equipment.

Why Choose Us

Experience the difference of working with true professionals who put your comfort first.

NATE & EPA 608-Certified, TACLA Licensed & Insured

Our NATE certification and EPA Section 608 certification mean we meet the industry's highest standards. We're fully licensed and insured for your protection.

Brands & Technologies Supported (ACCA Best Practices)

We service all major brands and stay current with the latest heating technologies and best practices from ACCA.

Types of Heating Systems We Service

Our team repairs and installs all major heating equipment:

• Gas furnaces and electric furnaces

• Heat pumps and dual fuel systems

• Ductless mini-split systems

• Boilers & radiant heat: repairs, controls/safety checks, and annual maintenance

• Light commercial packaged and rooftop units with quarterly/biannual PM, rooftop safety compliance, and minimal tenant/employee downtime

Local Reviews, Guarantees & 24/7 Live Dispatch

Check our local reviews to see why Dallas homeowners trust us. We guarantee our work and offer 24/7 live dispatch for emergencies.

Dallas-Fort Worth Service Area

Neighborhoods & Suburbs We Serve

We provide same-day service throughout Dallas County:

• Uptown

• Lakewood

• Plano

• Richardson

• Garland

• Irving

• Carrollton

• Addison

• Mesquite

Ready for Reliable Heating Service?

Frequently asked questions

How much does heating repair cost in Dallas, TX?

Basic heating repair typically runs $150-$450, while major repairs like heat exchanger replacement can reach $1,200-$2,500. We provide upfront pricing before starting work.

What types of heating systems do you service?

We service gas and electric furnaces, heat pumps, boilers, ductless systems, and commercial rooftop units from all major manufacturers.

How quickly can I schedule emergency heating repair?

We offer 24/7 emergency service with typical response times under 2 hours for urgent heating problems.

What qualifications or certifications do your technicians have?

Our technicians hold NATE certification, EPA certification, state TACLA licensing, and receive continuous manufacturer training.

What should I expect during a service appointment?

Expect thorough diagnostics, clear explanations, written estimates, and professional service. Most repairs complete the same day.

How do I know if my heater needs replacement vs. repair?

Consider replacement if your system is over 15 years old, needs frequent repairs, or has a cracked heat exchanger. We'll provide honest recommendations.

Are there energy-efficient heating options available?

Yes! High-efficiency furnaces reach 98% AFUE, and modern heat pumps achieve excellent SEER (Seasonal Energy Efficiency Ratio) and HSPF ratings. Check ENERGY STAR for efficiency guidelines.

Is your work covered by warranty or insurance?

We provide warranty on all labor and honor manufacturer warranties on parts. We're fully insured for your protection.

How often should heating systems be maintained?

Schedule annual maintenance each fall before heating season. This keeps your warranty valid and prevents breakdowns.

Do you offer financing or rebates for new heaters in Dallas?

Yes, we offer financing options and help you access Oncor rebates and federal tax credits for qualifying systems.

Is a heat pump or a furnace better for North Texas homes?

Heat pumps work well in Dallas's mild winters and provide cooling too. Gas furnaces cost less to operate during cold snaps. Dual fuel systems offer the best of both.

How fast can you install a new furnace or heat pump?

Most installations complete in one day. We offer same-day and next-day installation for many systems.

Do you charge extra for nights, weekends, or holidays? Are diagnostic fees credited toward the repair if I proceed?

We maintain transparent pricing for all service calls. Our diagnostic fee is credited toward your repair when you approve the work. Ask about our after-hours rates when you call.

Can you install my new system the same day and handle permits and code inspections for Dallas/DFW?

Yes, we offer same-day installation for many systems and handle all permits and code inspections required in Dallas and surrounding DFW municipalities.

How do your warranties and guarantees compare to big-box retailers or home warranty companies?

Unlike big-box retailers who subcontract work or home warranty companies with limited coverage, we provide direct manufacturer warranties, stand behind our labor, and offer comprehensive service from certified professionals who work for us directly.

For more information about HVAC systems and indoor air quality, visit the U.S. EPA's guide to HVAC and Indoor Air Quality.

Don't Wait for Heating Problems to Get Worse!

Whether you need emergency furnace repair, a new heat pump installation, or annual maintenance, we're here to help. Our licensed and insured HVAC company serves all of Dallas with transparent, upfront pricing and warranty-backed workmanship.