24/7 Emergency Heating & Furnace Repair in Dallas, TX — Same‑Day Service

24/7 Immediate Response — Fast Local Dispatch & ETA 60-90 Minutes

Live Dallas Phone Support + Text/GPS Tracking

You'll speak with a real person in Dallas who understands local conditions and can provide immediate guidance. Track your technician's arrival with real-time updates sent to your phone. Get text updates, photo estimates, and secure mobile payment links for a seamless after-hours experience.

What to Expect on Arrival (Licensed, Insured, Background-Checked)

Our background-checked technicians arrive in marked vehicles, wearing company uniforms. They'll diagnose the issue using professional diagnostic equipment and provide upfront pricing before any work begins. We carry general liability and workers' comp; proof of insurance available on request. Licensed by TDLR (Texas Department of Licensing & Regulation); license number displayed on request and on service vehicles.

Systems We Repair: Furnaces, Heat Pumps, Boilers, RTUs & Mini‑Splits

Gas & Propane Furnaces

We service all types: gas furnace (natural gas) and propane furnace systems. Specialists in gas heating systems with EPA certification for safe repairs.

Electric Furnaces / Air Handlers

Complete electric furnace / air handler system diagnostics and repairs.

Expert repair for all heat pump brands and models, including defrost control board issues and refrigerant (R-410A) problems.

Heat Pumps (R‑410A)

Ductless Mini‑Splits (Mitsubishi/Daikin)

Ductless mini-split heating and cooling system expertise for Mitsubishi, Daikin, and other major brands.

Boilers (Hydronic/Radiant)

Boiler repair for residential and light commercial properties. We repair gas and electric hydronic boilers, address circulator and relief valve issues, and ensure safe combustion with CO checks.

Service for package unit and rooftop unit (RTU) systems.

Package & Rooftop Units (RTU)

Smart Thermostats & Zoning Systems

Smart thermostat installation and zoning system repairs.

Common Furnace & Heat Pump Issues We Fix Today

No Heat, Low Heat, and Short Cycling

The most common emergency call. Could be a failed component or control issue. System turns on and off repeatedly, often caused by a dirty filter or faulty limit switch.

Ignition Failures: Hot Surface Igniter, Flame Sensor, Thermocouple

Modern furnaces use electronic ignition with hot surface igniter and flame sensor. Older units may have thermocouple or pilot light issues.

Airflow/Electrical: Blower Motor, Run Capacitor, Limit/Pressure Switch

A failed blower motor or run capacitor stops air circulation. Draft inducer motor, pressure switch, and limit switch problems prevent safe operation.

Heat Exchanger Cracks & High CO

A cracked heat exchanger is a serious carbon monoxide risk requiring immediate attention.

Heat Pump Defrost, Low Refrigerant, Refrigerant Leaks

Refrigerant leak detection and repair for heat pump systems. Defrost control board issues and low R-410A refrigerant problems.

Thermostat Calibration & Duct Leaks

Poor thermostat calibration and duct issues reduce comfort and efficiency.

Our Diagnostic & Repair Process (Combustion Analysis, CO Monitoring)

Safety check (CO and electrical)

Every service begins with CO (carbon monoxide) monitoring and electrical safety checks.

Professional diagnostic equipment

We use advanced tools to pinpoint problems quickly and accurately.

Combustion analysis & CO monitoring

Combustion analysis ensures safe, efficient operation.

Temperature rise and airflow measurements

Precise measurements verify proper system operation.

On-truck parts for same-day fixes

Most common parts in stock for immediate repairs. If parts are backordered, we can provide temporary heaters to keep you safe and comfortable.

Photos/video of issues and repairs

Visual documentation helps you understand the problem and solution.

Testing and quality assurance

Complete system testing before we leave.

Clean work area and final walkthrough

We respect your home and explain everything we've done.

Safety First: Carbon Monoxide (CO) & Electrical Hazards — When to Shut Off

When to shut off your heater

If you smell gas, hear unusual sounds, or see sparks, shut down immediately.

Shut it off immediately if you notice:

• CO detector alarm

• Gas odor (rotten egg smell)

• Electrical burning/sparking

• Visible flame rollout or smoke

CO symptoms and detector guidance

Headaches, dizziness, or nausea may indicate CO exposure. Install detectors on every level.

Electrical and burning smell precautions

Burning smells require immediate shutdown and professional inspection.

When to evacuate vs. ventilate

Gas leaks = evacuate. Slight odors = ventilate and call for service.

Gas leak protocol: contact your gas utility

For gas leaks, call your utility company first, then us for repairs.

CO detector placement & testing

Place detectors near bedrooms and test monthly.

Transparent Pricing: Trip/Dispatch Fee, Labor, Parts & After‑Hours Rates

Diagnostic Fee Credited with Repair

• Trip/diagnostic fee (credited with repair)

• Labor by complexity/after-hours

• Parts availability/brand-specific costs

• Membership discounts and coupons

• Financing for larger repairs/replacements

Standard trip/dispatch fees cover immediate response. In most cases, when you approve the repair, we credit the diagnostic fee toward your total bill.

Financing Options for Larger Repairs

Financing available for approved customers. Financing is available for larger repairs and replacements—ask about same-day approvals.

Labor charges based on repair complexity and time required. Common parts stocked on trucks; specialty items may need ordering. Emergency rates apply for nights and weekends. Save with online coupons and membership maintenance plan benefits.

All work includes written estimates and warranty/guarantee protection. Repairs include written parts and labor warranty; most common repairs carry a 1-year labor warranty—ask for details.

Repair vs. Replacement — Efficiency, Texas Permits & Code Compliance

When repair makes sense

Systems under 10 years old with minor issues are usually worth repairing.

When replacement is recommended

Frequent breakdowns or systems over 15 years may need replacement.

Energy efficiency considerations

New systems offer significant energy savings over older models.

Age, repair history, and parts availability

We'll review your system's history to recommend the best option.

Financing, rebates, and incentives

Rebates and incentives can offset replacement costs.

Load sizing and ductwork considerations

Proper sizing ensures comfort and efficiency.

Permits and code compliance in Texas

All work meets Texas HVAC regulations and code compliance requirements. Permits pulled as needed.

Service Area: Dallas Neighborhoods & Nearby Communities

Dallas neighborhoods and nearby communities

We know Dallas inside and out, providing fast response throughout the metro.

Neighborhoods: Downtown, Uptown, Oak Lawn, Lakewood, M Streets, Lower Greenville, East Dallas, Oak Cliff/Bishop Arts, Preston Hollow, North Dallas

Serving all Dallas neighborhoods including Downtown, Uptown, Oak Lawn, Lakewood, M Streets, Lower Greenville, East Dallas, Oak Cliff, Bishop Arts, Preston Hollow, North Dallas.

Nearby: Addison, Farmers Branch, Carrollton, Irving, Richardson, Plano, Garland, Mesquite, Grand Prairie, University Park, Highland Park

Plus nearby communities like Addison, Richardson, Garland, Plano, Irving, Mesquite, Carrollton, Farmers Branch, Grand Prairie, University Park, Highland Park.

Severe weather routing during freezes

During extreme Texas cold events, we optimize routing for maximum coverage.

Fast routing and local dispatch

GPS routing and local knowledge mean faster arrival times.

Qualifications: Licensed, Insured, EPA & NATE‑Certified Technicians

Licensed and insured in Texas

Fully licensed technician teams with complete insurance coverage.

EPA-certified technicians

All techs hold current EPA certification for refrigerant handling.

NATE-certified technicians

Many technicians have NATE certification for advanced expertise.

Background-checked and drug-tested

Every technician passes thorough screening for your safety.

Ongoing factory training across major brands

Regular training on manufacturer brands including Trane, Carrier, Lennox, Goodman, Rheem, Ruud, American Standard, York, Bryant, Amana.

Permits, inspections, and Texas HVAC regulations

Full compliance with all local and state requirements.

Before We Arrive: Quick Checks to Try

Safety steps if you smell gas or suspect CO

1. Set thermostat to Heat and 2-3° above room temp; fan on Auto.

2. Replace/inspect the air filter.

3. Check breaker/fuse and furnace switch; verify gas valve is open.

4. Note error codes, model/serial, and filter size.

5. Clear access to the unit (attic/closet and outdoor).

Evacuate if needed and call from outside.

Photos/video can speed diagnosis

Send photos of error codes or issues to help us prepare.

After the Repair: Seasonal Tune‑Ups & Membership Maintenance Plans

Seasonal tune-ups

Annual seasonal tune-up prevents most emergencies.

Priority membership plans

Members get priority service and discounts.

Thermostat programming for freeze protection

We'll help program your thermostat to prevent freezing.

Filter schedule

Regular filter changes prevent many problems.

Duct sealing and insulation recommendations

Duct sealing and insulation improves comfort and efficiency.

Signs to watch for next time

We'll teach you warning signs to catch problems early.

Brands We Service (Trane, Carrier, Lennox, Goodman, Rheem, Ruud, American Standard, York, Bryant, Amana)

Trane, Carrier, Lennox, Goodman

Factory-trained on major brands for expert service.

Rheem, Ruud, American Standard, York

Complete parts access and technical expertise.

Bryant, Amana, Payne, Daikin, Mitsubishi (mini-splits)

Specialized training for all system types.

Coupons, Financing & Guarantees

Online coupons & seasonal specials

Check our website for current savings opportunities.

0% APR financing OAC on replacements

Flexible payment options for qualified buyers.

Warranty terms and satisfaction guarantee

All repairs backed by our satisfaction promise.

Residential & Light Commercial Heating Service

✅ Ready for Immediate Dispatch

Single-family homes, condos, and apartments

Complete residential heating services.

Retail & office RTUs and package units

Commercial expertise for business heating needs.

Property managers and landlord approvals

We work with property management companies. We coordinate with property managers for approvals and can send COI and W-9 upon request.

Fast response • Licensed techs • Upfront pricing

Frequently asked questions

How quickly can you dispatch a technician for heating emergencies in Dallas?

We typically arrive within 60-90 minutes for emergency calls in Dallas. During severe weather, times may extend slightly, but we prioritize true emergencies.

What is the average cost of emergency heating repair?

Costs vary based on the problem. Simple repairs like replacing a capacitor might run $200-400, while complex issues could be $800-1,500. We provide upfront pricing before any work.

What certifications do your heating technicians hold?

Our technicians are licensed by the state of Texas, EPA-certified for refrigerant handling, and many hold NATE certifications. All are insured and background-checked.

Can repairs be completed the same day?

Yes, most repairs are completed same-day. We stock common parts on our trucks. Specialty parts may require ordering.

Will my repair be covered by warranty?

All our repairs include a warranty on parts and labor. Manufacturer warranties may also apply to certain components.

What types of heating systems do you service?

We service all types: gas furnaces, electric furnaces, heat pumps, boilers, ductless systems, and package units from all major brands.

How do you diagnose heating issues?

We use professional diagnostic equipment including combustion analyzers, digital multimeters, and temperature sensors to accurately identify problems.

What safety risks should I be aware of if my heater fails?

Main risks include carbon monoxide poisoning from cracked heat exchangers, fire hazards from electrical issues, and frozen pipes during cold weather.

What are my options if the unit cannot be repaired?

We'll provide replacement options with financing available. We can often install a new system within 24-48 hours if needed.

Are your services compliant with Dallas and Texas HVAC regulations?

Yes, we're fully licensed through TDLR, pull all required permits, and ensure all work meets local and state codes.

Do you charge extra for nights, weekends, or holidays?

After-hours emergency rates do apply, but we're transparent about all costs before starting work.

Can you fix my brand (Trane, Lennox, Goodman, Carrier, etc.)?

Yes, we service all major brands and have factory training for Trane, Carrier, Lennox, Goodman, Rheem, and many others.

Is the trip/diagnostic fee applied to the repair?

In most cases, yes. When you approve the repair, we credit the diagnostic fee toward your total bill.

Can you provide temporary heaters if parts are on order or the unit is unsafe to operate?

Yes, if parts are backordered or your unit is unsafe to operate, we can provide temporary heaters to keep you safe and comfortable until permanent repairs are completed.

Do you work with home warranty companies or manufacturer warranties in Dallas?

Yes, we work with most home warranty companies and can help process manufacturer warranty claims. We'll handle the paperwork and coordinate approvals for covered repairs.

Ready to Schedule Emergency Service?

Don't suffer through another minute without heating or cooling. Our expert technicians are standing by 24/7 to restore your comfort and safety.

✓ Licensed & insured ✓ Upfront pricing ✓ All brands serviced ✓ 12-month labor warranty

Will you price-match written estimates from other licensed HVAC contractors in Dallas?

We offer competitive pricing and will review written estimates from other licensed Dallas HVAC contractors. Contact us with details for consideration.

References: EPA: Indoor Air Quality | State of Texas: HVAC Contractor Licensing (TDLR) | ENERGY STAR: Heating & Cooling