Dallas Furnace Repair | 24/7 Same-Day Licensed HVAC Techs

Types of Furnaces We Repair

Natural gas and propane furnaces (80% and 90%+ AFUE)

We service both standard 80% AFUE units and high-efficiency condensing furnaces (90%+ AFUE). Understanding the difference - 80% AFUE vs 95%+ AFUE units - helps explain your energy bills during Dallas winters.

Electric furnaces and air handlers

Our technicians are fully qualified to repair electric heating systems and air handlers, ensuring safe and efficient operation.

Common Furnace Problems & Warning Signs

Recognizing problems early can prevent bigger issues and keep your family safe. Here are the most common signs you need professional heating system troubleshooting:

No heat, low airflow, short cycling

When your furnace runs but doesn't produce warm air, the problem often involves the ignition system or blower motor. Low airflow, overheating, or frequent on-off cycling may indicate blower assemblies, ECM motors, or limit switch issues.

Ignition, pilot, and flame sensor issues

Modern furnaces use electronic igniters, while older models have pilot lights. Both can fail and prevent your furnace from starting. Dirty or faulty flame sensors are among the most common repair needs.

Thermostat calibration and smart thermostat wiring

Incorrect temperature readings or unresponsive smart thermostats (Nest, Ecobee, Honeywell) can make your whole system malfunction. We diagnose thermostat wiring faults and resolve common smart thermostat issues including C-wire problems and heat call errors.

Experiencing any of these problems?

Free estimate with repair • Upfront pricing • Safety inspection included

Our Repair Process (From Diagnosis to Warranty)

Call intake, arrival window, and text/GPS tracking

When you call, we gather basic information about your furnace problem and schedule your appointment with a 2-hour arrival window. You'll receive text updates and GPS tracking.

On-site diagnostics & upfront estimate (diagnostic fee credited)

Our technician performs complete system testing to find the exact problem. You receive a clear written quote before any work begins. Diagnostic fee credited with approved repair.

Repairs we perform (OEM parts, documentation)

We use OEM parts with proper documentation for warranty compliance. Our comprehensive repair process includes: 1. Arrival window and text-ahead notification 2. Complete diagnostics 3. Upfront estimate 4. Repair with OEM parts 5. CO/combustion analysis 6. Final run test/clean-up 7. Written documentation

CO/combustion analysis, final run test & clean-up

After gas-side repairs, we perform CO test and combustion analysis. Every job includes final run test, area clean-up, and written service documentation/warranty.

Furnace Repair Cost in Dallas, TX

Typical price ranges by repair

Here's what you can expect for common repairs:

• Igniter replacement: $200-$400

• Flame sensor: $150-$300

• Pressure switch: $250-$450

• Blower motor/ECM: $400-$800

• Control board: $500-$900

Factors that affect cost

Price depends on the specific parts needed, your furnace brand, accessibility, and system age. Diagnostic fee credited with approved repair.

Free estimate policy & financing options

We offer free estimates and financing options for unexpected major repairs, making it easier to get your heat restored quickly.

Permits, Codes & CO Safety in Dallas

City of Dallas code compliance and inspections

Repairs typically don't require permits, while replacements do. We handle all permitting and inspections, ensuring full City of Dallas code compliance.

CO detector recommendations

We recommend installing CO detectors on every level of your home and testing them monthly. Our technicians verify proper ventilation and perform CO testing after all gas-side repairs.

Parts & Components We Service

Ignition systems, controls, motors (ECM), and sensors

We repair all major components including:

• Igniters and pilot lights

• Flame sensors and thermocouples

• Gas valves and pressure switches

• Control boards and transformers

• Blower assemblies and ECM motors

• Limit switches and rollout switches

• Draft inducer motors

• Relays and control sensors

Venting, condensate, ductwork & static pressure

We handle condensate trap and drain issues, venting (PVC/metal) and flue problems, plus basic static pressure corrections. We can advise on duct modifications when needed.

Thermostat wiring & smart thermostats (Nest, Ecobee, Honeywell)

Our techs diagnose and repair thermostat wiring faults, configure smart thermostats, and resolve C-wire issues and communication errors.

Licensed, Certified, and Experienced Technicians

TDLR, NATE, EPA 608, insured & background-checked

Our team holds:

• Texas HVAC licensing (TDLR compliance)

• NATE-certified technician credentials

• EPA Section 608 Certification

• Full insurance and background checks

• 12-month labor warranty on all work

Financing, Coupons & Maintenance Plans

Diagnostic fee credit & specials

We credit your diagnostic fee when you approve repairs. Ask about current seasonal promotions and coupons for additional savings.

Membership tune-ups, priority scheduling, discounts

Our maintenance plans include annual tune-ups, priority scheduling during peak seasons, and repair discounts for members.

If Repair Isn't Viable: Next Steps

When replacement makes sense & load calculation

Sometimes, especially with furnaces over 15 years old, replacement is more cost-effective than repair. We perform proper load calculations to size your new system correctly.

Interim heating safety; financing and potential rebates

If immediate replacement isn't possible, we provide interim heating safety guidance including proper space heater use and CO safety precautions. Ask about available rebates and financing options for new installations.

Seasonal Maintenance Tips

Filter schedule (MERV 8-11), annual tune-ups

Recommended maintenance schedule:

• Change filters monthly during heating season (MERV 8-11 for most homes)

• Schedule annual professional tune-ups before winter

• Clean supply and return vents

• Keep area around furnace clear

CO detector testing and pre-winter check signs

Test CO detectors monthly. Schedule service before winter if you notice odd noises, frequent cycling, or uneven heat distribution.

Brands & Smart Thermostats We Service

Carrier, Trane, Lennox, Goodman, Rheem (and more)

We service all major furnace brands including Ruud, Amana, York, Bryant, Payne, and American Standard.

Nest, Ecobee, Honeywell

Our technicians are experienced with all smart thermostat brands and can resolve connectivity, wiring, and programming issues.

Service Area: Dallas & Surrounding Communities

We provide fast furnace repair throughout:

• Dallas proper

• Plano, Frisco, McKinney

• Irving, Grand Prairie, Arlington

• Garland, Richardson, Mesquite

• Fort Worth and wider DFW

• Addison, Carrollton, Allen, Prosper, Lewisville

Frequently asked questions

How much does furnace repair cost in Dallas, TX?

Most repairs range from $150-800. Simple fixes like sensor cleaning cost less, while major components like heat exchangers cost more. We provide free estimates before starting work.

What are the most common furnace problems?

The most frequent issues include dirty flame sensors, failed igniters, thermostat problems, and blower motor failures. Regular maintenance prevents many common problems.

How quickly can a technician arrive for furnace repair in Dallas?

We offer same-day service for most calls and 24/7 emergency response. During peak winter demand, we prioritize no-heat emergencies.

Are your technicians licensed and certified in Texas?

Yes, all technicians hold proper Texas HVAC licenses, NATE certification, and EPA Section 608 certification. We're fully insured and bonded.

What should I do if my furnace isn't heating properly?

Check your thermostat settings and filter first. If those look good, call for professional service. Never ignore gas smells or unusual sounds.

Do you offer warranties or guarantees on furnace repairs?

Yes, we provide a 12-month written labor warranty on all work plus manufacturer warranties on parts. Your satisfaction is guaranteed.

Do you waive the diagnostic fee if I approve the repair?

Yes, we credit the diagnostic fee toward your repair cost when you approve the work.

Can you repair all furnace brands?

We service all major brands including Carrier, Trane, Lennox, Goodman, Rheem, Ruud, Amana, and more.

Is it better to repair or replace a 15-year-old furnace?

It depends on the repair cost and your furnace's overall condition. We'll help you make the best decision for your budget and comfort needs.

Do furnace repairs require a permit in Dallas? When are inspections needed, and do you handle them for me?

Repairs typically don't require permits, but replacements do. We handle all necessary permits and coordinate inspections with the City of Dallas for you.

Can you troubleshoot smart thermostats (Nest/Ecobee/Honeywell) that are causing heat issues or error codes?

Yes, we diagnose and fix smart thermostat issues including wiring problems, C-wire installation, connectivity errors, and heat call failures.

Do you offer membership maintenance plans with priority scheduling and repair discounts?

Yes, our maintenance plans include annual tune-ups, priority scheduling during busy seasons, and discounts on repairs for members.

✓ Free Estimates ✓ 24/7 Emergency Service ✓ Licensed & Certified Techs

References:

• Air Conditioning Contractors of America (ACCA)

• Texas Dept. of Licensing & Regulation — HVAC

• U.S. Dept. of Energy — Maintain Your Heating System

• Atmos Energy Emergency

Don't Wait - Call Now for Fast Furnace Repair!

Call now for same-day furnace repair

Why Choose Us for Dallas Furnace Repair?

• Texas-licensed HVAC contractor (TDLR compliant)

• NATE-certified technicians on every job

• EPA Section 608 certified for safe refrigerant handling

• Fully insured and background-checked team

• OEM parts with proper documentation

• Upfront, itemized estimates - no surprises

• 12-month written parts and labor warranty

• 24/7 emergency availability

• Safety-first approach with CO testing after repairs

• Diagnostic fee credited with approved repair

Don't let a broken furnace leave you in the cold. Our expert technicians are ready to restore your heat quickly and safely. With 24/7 availability, upfront pricing, and certified professionals, we're Dallas's trusted choice for furnace repair.

Same-day service available • Free estimates • All brands serviced

Additional Resources

• U.S. EPA Section 608 Certification

• NATE (North American Technician Excellence)

• Texas HVAC Licensing (TDLR)